FAG S6302-2ZR Single Row Ball Bearings

Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing Part Number:6204; Bearing Retained:Yes (with retaining; Width T(mm):55 ～ 80; Flange O.D. H(φ):81; Bearing Material:[Steel] Steel;

Float:0.083 in; Weight:88 lb; Shaft Tolerance:0.0050 in; Y1 - Geometry Factor:2.62; Dimension D Max:15.75 in; Pre Install Clearance Min:0.0053 in; Dimension H:1.92 in; Grease Lubrication - B/C/O Seal:400 rpm; Dimension J (Bolt Size):0.875 in; Eng Internal Radial Clearance - Max:0.0067;

Size Standards:Metric System; Number of Raceway Ring Rows:Single Row; D:16; Load Direction:Radial; Days to Ship:9 Days or more; Precision:Grade 0; Rolling Element Material:Steel; Type:Ball; Basic Dynamic Load Rating(N):1760; RoHS:6;

H:212 mm; Jmax:295 mm; A1:100 mm; Bearing:21316; A:145.00 mm; N1:28 mm; Jmin:285 mm; Seal Type:Labyrinth; End Cover1:EC519-616; H2:35.0 mm;

Dimension W:1.7 in; Cor - Static Load Rating:133087 lbf; Dimension A:10.2 in; Dimension D:15.0 in; Tensioning Unit Type:Tension Type; Bearing - Housing - Seal:MSM115BRHHTPS; Cr - Dynamic Load Rating:102063 lbf; Dimension V:7.5 in; Maximum Speed:1820 rpm; Ca - Axial Load Rating:7014 lbf;

Cr - Dynamic Load Rating:37768 lbf; Bolt Size:2 x M20; Dimension H1:1.5 in; Bearing Number:MSE204BX; Series Type:Medium Series; Seal Type:Felt Type; Dimension H:3.740 in; Cor - Static Load Rating:42714 lbf; Dimension J:10.6 in; Weight:47 lb;

Inner/Outer Ring Material:Steel; Inner/Outer Ring Material:Steel; Load Direction:Radial; Raceway Ring Shape:Cylindrical Roller; Shaft Bore Config.:Cylindrical Bore; D:215; High-Speed Steel:Standard; Outer ring oil hole:Standard; High-Speed Steel:Standard; Load Direction:Radial;

Outer Ring Type:Flat; Size Standards:Metric System; I.D.(Ø):80; Material Symbol:No; Raceway Ring Shape:Cylindrical Roller; Holder Color:No; Specifications:Standard; Bearing Ring Type:Type NJ; Symbol of contact angle:No; Low Torque Specification:No;

Number of Bearings:Single; Bearing Retained:No; Type:Bearings with Housin; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:No; Shape:Flange Type; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

RoHS:6; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Flange O.D. H(φ):77; Type:Bearings with Housin; Volume Discount:Available; Seals:DD (Contact Rubber S; Holder Surface Treatment:Black Oxide Coating; Width T(mm):50;

Bearing - Housing - Seal UPC:013992078216; Dimension B:10.0 in; Cr - Dynamic Load Rating:102063 lbf; Bearing - Housing - Seal:MSM115BRHRSS; Note:This product line wa; Dimension H:2.0 in; Seal Type:Viton Single Lip; Support Type:Take-Up; Cor - Static Load Rating:133087 lbf; Dimension U:0.2 in;

Height H(inch):2; Holder Surface Treatment:Clear Anodize; Volume Discount:Available; Seals:ZZ (Double Shield); Number of Bearings:Double; Bearing Part Number:6003; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Material:Steel;

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:49700 lbf; Aa - Cage-Cone Backface Clearance:0.04 in; C1 - Dynamic Radial Rating (1 million revolutions)6:28500 lbf; a - Effective Center Location4:-0.36 in; Series:435; R - Cone Backface To Clear Radius3:0.14 in; Cone Part Number:438; Des

Type:Ball; Number of Raceway Ring Rows:Single Row; Preload Mark:C3; Inner/Outer Ring Material:Steel; B:34; Outer Ring Shape:Flat; Grease symbol:/5K; d:100; Rolling Element Material:Steel; Precision:Grade 0;

Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Shape:Flange Type; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing I.D. d(mm):12; Type:Bearings with Housin; Number of Bearings:Double;